DTC P0441: Evaporative Emission Control System Incorrect Purge Flow [11/2016 - 10/2017]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO P0441)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
- Read the DTCs.
Powertrain > Engine and ECT > Trouble Codes
Result
Result Proceed to DTC P0441 is output A DTC P0441 and other DTCs are output B HINT:
If any DTCs other than DTC P0441 are output, troubleshoot those DTCs first.
Result:
A
GO TO EVAP SYSTEM. Refer to EVAP SYSTEM [11/2016 - ]
Result:
B
GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2016 - 10/2017]