DTC P0106: Manifold Absolute Pressure Circuit Problem [11/2016 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0107 (Refer to DESCRIPTION ).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P0106 | Manifold Absolute Pressure Circuit Problem | Intake manifold pressure measured after engine start drops by less than 3 kPa (0.44 psi) compared to the intake manifold pressure (atmospheric pressure) measured before engine start (2 trip detection logic). |
|
Comes on | DTC stored |