LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (SFI System [2GR-FE] - Diagnostic Codes - (Except Hybrid) (1 Of 5)) >> SFI System >> DTC P1607: Cruise Control Input Processor [12/2013 - 11/2016] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The ECM continuously monitors its main and sub CPUs. This self-check ensures that the ECM is functioning properly. If outputs from the CPUs are different and deviate from the standard, the ECM will illuminate the MIL and store this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P1607 Cruise Control Input Processor ECM CPUs malfunction (1 trip detection logic). ECM Comes on DTC stored DTC for Mexico Models
- Applies