Monitor Description

The ECM monitors the input signals of the No. 1 accelerator pedal position sensor. If the input signals and control signals deviate, this DTC is stored.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P060D-49	Internal Control Module Accelerator Pedal Position Performance Internal Electronic Failure	Either of the following conditions is met (1 trip detection logic): There is an ECM main CPU error. There is an ECM sub CPU error.	ECM	Comes on	DTC stored	SAE Code: P060D DTC for Mexico Models: - Applies