LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belts (Service Information) (Except Hybrid) >> REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 2 Seat) >> Installation [11/2016 - ] >> Procedure

Installation [11/2016 - ]: Procedure

  1. INSTALL SEAT INNER BELT SUB-ASSEMBLY 
    1. Pass the seat inner belt sub-assembly through the rubber band of the rear seat cushion assembly as shown in the illustration.
      GTY706236Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Rubber Band
    2. Connect the connector.
    3. Engage the 4 fasteners to install the seat inner belt sub-assembly.
  2. INSTALL REAR NO. 2 SEAT ASSEMBLY 

    Refer to INSTALLATION [11/2016 - ]

scientia non olet · About LEMON Manuals