LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Service Information) (Except Hybrid) >> Rain Sensor >> Removal [11/2015 - ] >> Procedure

Removal [11/2015 - ]: Procedure

  1. REMOVE RAIN SENSOR COVER 
    1. Disengage the 2 claws and slide the rain sensor cover as shown in the illustration.
      GTY568841Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws to remove the rain sensor cover.
      GTY586739Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE RAIN SENSOR 
    1. Disconnect the connector.
      GTY586738Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Release the stopper by pulling it out and remove the rain sensor as indicated by the arrows, in the order shown in the illustration.
      GTY539618Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Stopper
scientia non olet · About LEMON Manuals