Disassembly [12/2013 - 11/2016]: Procedure

REMOVE REAR SEAT HEADREST ASSEMBLY

REMOVE REAR SEAT INNER BELT COVER LH

Disengage the 2 claws and remove the rear seat inner belt cover LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEAT ASSEMBLY LH

Remove the 2 clips.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a T45 "TORX" socket wrench, remove the 2 bolts.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 4 bolts and No. 2 seat assembly LH.

REMOVE NO. 2 SEAT CUSHION COVER WITH PAD LH

Disengage the 2 clips.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the hook.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the 8 hooks and remove the No. 2 seat cushion cover with pad LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH

Remove the hog ring.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 10 hog rings and No. 2 seat cushion cover sub-assembly LH from the rear seat cushion pad LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE LOWER REAR SEAT CUSHION HINGE COVER LH

Disengage the 4 claws and guide, and remove the lower rear seat cushion hinge cover LH as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE REAR SEAT CUSHION HINGE COVER CAP

Disengage the claw and 2 guides, and remove the rear seat cushion hinge cover cap.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 3 REAR SEAT CUSHION HINGE COVER

Disengage the 4 claws and guide, and remove the No. 3 rear seat cushion hinge cover as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH

Using a T45 "TORX" socket wrench, remove the 2 bolts and No. 2 seat cushion frame sub-assembly LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH

Disengage the 8 claws as indicated by the arrows, in the order shown in the illustration to remove the No. 2 seatback board sub-assembly LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE REAR SIDE SEAT BAND SUB-ASSEMBLY (for LH Side)

Disengage the 3 hooks.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the hook and remove the rear side seat band sub-assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 REAR SEAT COVER BEZEL (for LH Side)

Remove the 2 screws.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the guide and remove the No. 2 rear seat cover bezel.

REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY

Disengage the 4 claws and remove the 2 rear No. 2 seat headrest support assemblies.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEATBACK COVER WITH PAD LH

Disengage the 4 hooks and remove the No. 2 seatback cover with pad LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY LH

Remove the 6 hog rings and No. 2 seatback cover sub-assembly LH from the separate type rear seatback pad.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 REAR SIDE SEAT BAND SUB-ASSEMBLY (for LH Side)

Disengage the hook and remove the No. 2 rear side seat band sub-assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEAT HINGE COVER

Remove the screw.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the guide and remove the No. 2 seat hinge cover.

REMOVE NO. 2 SEAT NO. 3 HINGE COVER

Remove the screw.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the guide and remove the No. 2 seat No. 3 hinge cover.

REMOVE REAR NO. 2 SEAT RECLINING COVER LH (for LH Side)

Remove the 2 screws and rear No. 2 seat reclining cover LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE REAR NO. 2 SEAT RECLINING COVER RH (for LH Side)

Remove the 2 screws and rear No. 2 seat reclining cover RH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY LH

Disengage the 4 cable clamps and remove the rear No. 2 seat cushion lock cable assembly LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for LH Side)

Disengage the 4 cable clamps and remove the rear No. 2 seat cushion lock cable assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE REAR SEAT HEADREST ASSEMBLY
REMOVE NO. 2 SEAT HEADREST ASSEMBLY

REMOVE REAR SEAT INNER BELT COVER RH

Disengage the 2 claws and remove the rear seat inner belt cover RH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEAT ASSEMBLY RH

Remove the 2 clips.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the hook.

Using a T45 "TORX" socket wrench, remove the bolt.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the nut.
Remove the 4 bolts and No. 2 seat assembly RH.

REMOVE NO. 2 SEAT CUSHION COVER WITH PAD RH

Disengage the 2 clips.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the 13 hooks and remove the No. 2 seat cushion cover with pad RH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH

Remove the hog ring.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 11 hog rings and No. 2 seat cushion cover sub-assembly RH from the rear seat cushion pad RH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE REAR SEAT CUSHION HINGE COVER CAP

Disengage the claw and 2 guides, and remove the rear seat cushion hinge cover cap.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 REAR SEAT CUSHION HINGE COVER

Disengage the 4 claws and guide, and remove the No. 2 rear seat cushion hinge cover as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 1 REAR SEAT CUSHION HINGE COVER

Disengage the 4 claws and guide, and remove the No. 1 rear seat cushion hinge cover as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY RH

Using a T45 "TORX" socket wrench, remove the 2 bolts and No. 2 seat cushion frame sub-assembly RH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE REAR NO. 2 SEATBACK COVER RH

Disengage the 4 claws and remove the rear No. 2 seatback cover RH.

REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY RH

Disengage the 12 claws as indicated by the arrows, in the order shown in the illustration to remove the No. 2 seatback board sub-assembly RH.

REMOVE REAR SEAT BELT HOOK

Remove the rear seat belt hook.

REMOVE REAR SIDE SEAT BAND SUB-ASSEMBLY (for RH Side)

Disengage the hook and remove the rear side seat band sub-assembly.

REMOVE NO. 2 REAR SEAT COVER BEZEL (for RH Side)

Remove the 2 screws.

Disengage the guide and remove the No. 2 rear seat cover bezel.

REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY

for RH Side:

Disengage the 4 claws and remove the 2 rear No. 2 seat headrest support assemblies.

for Center:

Disengage the 4 claws and remove the 2 rear No. 2 seat headrest support assemblies.

REMOVE NO. 2 SEATBACK COVER WITH PAD RH

Disengage the 8 hooks and remove the No. 2 seatback cover with pad RH.

REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH

Remove the 6 hog rings and No. 2 seatback cover sub-assembly RH from the No. 2 seatback pad RH.

REMOVE NO. 2 REAR SIDE SEAT BAND SUB-ASSEMBLY (for RH Side)

Disengage the hook and remove the No. 2 rear side seat band sub-assembly.

REMOVE NO. 2 SEAT NO. 4 HINGE COVER

Remove the screw.

Disengage the guide and remove the No. 2 seat No. 4 hinge cover.

REMOVE NO. 2 SEAT NO. 2 HINGE COVER

Remove the screw.

Disengage the guide and remove the No. 2 seat No. 2 hinge cover.

REMOVE REAR NO. 2 SEAT RECLINING COVER LH (for RH Side)

Remove the 2 screws and rear No. 2 seat reclining cover LH.

REMOVE REAR NO. 2 SEAT RECLINING COVER RH (for RH Side)

Remove the 2 screws and rear No. 2 seat reclining cover RH.

REMOVE REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY RH

Disengage the 4 cable clamps and remove the rear No. 2 seat cushion lock cable assembly RH.

REMOVE REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for RH Side)

Disengage the 4 cable clamps and remove the rear No. 2 seat cushion lock cable assembly.