LEMON Manuals
: Even more car manuals for everyone
Home
>>
Toyota
>>
2018
>>
Highlander LE Plus, AWD
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Interior/Illumination Lights
>>
Lighting System (Interior) - Service Information - (Except Hybrid)
>>
Personal Light
>>
Removal [12/2013 - ]
>>
Procedure
Removal [12/2013 - ]: Procedure
REMOVE MAP LIGHT ASSEMBLY
for Normal Roof:
Using a moulding remover, disengage the 4 clips.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Disconnect the connector to remove the map light assembly.
for Sliding Roof, Panoramic Moon Roof:
Using a moulding remover, disengage the 4 clips and 2 claws.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Disconnect the connector to remove the map light assembly.
REMOVE MAP LIGHT BULB
Turn the 2 map light sockets with the 2 map light bulbs as shown in the illustration to remove them as a unit.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Remove the 2 map light bulbs from the 2 map light sockets.