LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Corolla XLE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Diagnostics - Introduction (1 Of 2) (Model Code: ZRE172) >> Meter / Gauge System >> Initialization [08/2013 - 08/2016] >> Initialization [08/2013 - 08/2016]

Initialization [08/2013 - 08/2016]

  1. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE (for Multi-information display (Segment LCD type)) 

    HINT: 

    The DISP switch is located on the steering pad switch assembly.

    1. Turn the ignition switch to ON.
    2. Press the DISP switch until the TRIP A meter appears.
    3. Turn the ignition switch off.
    4. Turn the ignition switch to ON while pressing and holding the DISP switch. Hold the DISP switch until the following conditions are met and 5 seconds have elapsed.
      1. The TRIP A meter shows "000000".
      2. The oil maintenance warning light goes off.
  2. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE (for Multi-information display (Dot LCD type)) 

    HINT: 

    The TRIP switch knob is located on the combination meter assembly.

    1. Turn the ignition switch to ON.
    2. Press the TRIP switch knob until the TRIP A meter appears.
    3. Turn the ignition switch off.
    4. Turn the ignition switch to ON while pressing and holding the TRIP switch knob. Hold the TRIP switch knob until the following conditions are met and 5 seconds have elapsed.
      1. The TRIP A meter shows "000000".
      2. The multi-information display shows that the reset is complete.
scientia non olet · About LEMON Manuals