LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information (Except Hybrid) >> Steering Pad Switch >> Removal [10/2020 - ] >> Procedure

Removal [10/2020 - ]: Procedure

  1. REMOVE HORN BUTTON ASSEMBLY 

    Refer to REMOVAL [10/2020 - ]

  2. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect the steering pad switch connector from the spiral cable with sensor sub-assembly.
    2. Remove the 2 screws.
      GTY742698Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 4 claws and 3 pins to remove the steering pad switch assembly.
scientia non olet · About LEMON Manuals