LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt - Service Information (Except Hybrid) >> Child Restraint Seat Anchor Bracket >> Removal [06/2017 - 09/2019] >> Procedure

Removal [06/2017 - 09/2019]: Procedure

  1. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) 

    Refer to PROCEDURE - Step 3

  2. REMOVE REAR SEAT CUSHION LOCK HOOK (for Fixed Seat Type) 

    Refer to PROCEDURE - Step 4

  3. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Fold Down Seat Type) 

    For TMC Made:

    Refer to PROCEDURE - Step 3

  4. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type) 

    For TMC Made:

    Refer to PROCEDURE - Step 4

    For TMMK Made:

    Refer to PROCEDURE - Step 7

  5. REMOVE REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type) 

    Refer to PROCEDURE - Step 8

  6. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH 
    1. Disengage each clamp.
    2. Remove the 2 bolts and child restraint seat anchor bracket sub-assembly LH.
      GTY753457Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

scientia non olet · About LEMON Manuals