LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System - Service Information (2 Of 2) (Except Hybrid) >> Telltale Light Assembly >> Installation [10/2020 - ] >> Procedure

Installation [10/2020 - ]: Procedure

  1. INSTALL PASSENGER AIRBAG ON/OFF INDICATOR (TELLTALE LIGHT ASSEMBLY) 
    1. Engage the 3 claws to install the passenger airbag ON/OFF indicator (telltale light assembly).
  2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 19

  3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 7 Inch Display) 

    Refer to PROCEDURE - Step 20

  4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 9 Inch Display) 

    Refer to PROCEDURE - Step 21

  5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 1

  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 23

  7. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

  8. INSTALL NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 12

scientia non olet · About LEMON Manuals