LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission System (UA80E) - Service Information (1 Of 3) (Except Hybrid)) >> Speed Sensor >> Installation [06/2017 - ] >> Procedure

Installation [06/2017 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NC) 
    1. Install the transmission revolution sensor (NC) and spacer to the counter drive gear sub-assembly with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Install the transmission revolution sensor (NT) to the automatic transaxle case sub-assembly with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [06/2017 - ] 

scientia non olet · About LEMON Manuals