LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 42 (Automatic Transmission System (UA80E) - Service Information (3 Of 3) (Except Hybrid)) >> Oil Pump >> Disassembly [06/2017 - ] >> Procedure

Disassembly [06/2017 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE CLUTCH DRUM OIL SEAL RING 
    1. Remove the 4 clutch drum oil seal rings from the stator shaft assembly.
      GTY698807Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE OIL STRAINER ASSEMBLY 
    1. Using a T30 "TORX" socket wrench, remove the 2 bolts and oil strainer assembly from the front oil pump cover sub-assembly.
      GTY698806Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE STATOR SHAFT ASSEMBLY 
    1. Remove the 5 bolts and stator shaft assembly from the front oil pump body.
      GTY698817Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT OIL PUMP DRIVE GEAR 
    1. Remove the front oil pump drive gear from the front oil pump body.
      GTY698819Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FRONT OIL PUMP DRIVEN GEAR 
    1. Remove the front oil pump driven gear from the front oil pump body.
      GTY698818Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE FRONT OIL PUMP BODY 
    1. Remove the front oil pump body from the front oil pump cover sub-assembly.
      GTY698820Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE RING PIN 
    1. Remove the 2 ring pins from the front oil pump cover sub-assembly.
      GTY733622Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals