DTC P0340-31: Camshaft Position Sensor "A" Bank 1 or Single Sensor No Signal; DTC P0345-31: Camshaft Position Sensor "A" Bank 2 No Signal [06/2017 - 08/2018]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0340-11.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0340-31 | Camshaft Position Sensor "A" Bank 1 or Single Sensor No Signal | A missing VVT sensor (for intake camshaft of bank 1) signal despite the crankshaft position sensor inputs being normal at an engine speed of 600 rpm or higher (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0340 DTC for Mexico Models: Applies |
| P0345-31 | Camshaft Position Sensor "A" Bank 2 No Signal | A missing VVT sensor (for intake camshaft of bank 2) signal despite the crankshaft position sensor inputs being normal at an engine speed of 600 rpm or higher (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0345 DTC for Mexico Models: Applies |
Reference: Inspection using an oscilloscope.