LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Engine Control System (2GR-FKS) - Diagnostic Codes (4 Of 9) (Except Hybrid)) >> SFI System >> DTC P0190-2A: Fuel Rail Pressure Sensor "A" Signal Stuck in Range; DTC P0190-64: Fuel Rail Pressure Sensor "A" Signal Plausibility Failure [08/2018 - ] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different variant/trim than selected.
CORRELATION MONITOR WITH BAROMETRIC PRESSURE

Malfunction counter 5 seconds or more
Fuel pressure sensor (for high pressure side) output Less than -1.394 MPa (-14.2 kgf/cm2 , -202.1 psi), or higher than 2.035 MPa (20.8 kgf/cm2 , 295.1 psi)
STUCK MONITOR

Malfunction counter 5 times or more
Fuel pressure sensor (for high pressure side) output deviation Less than 0.3 MPa (3.1 kgf/cm2 , 43.5 psi)