DTC P0011-07: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Mechanical Failure; DTC P0021-07: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2 Mechanical Failure [06/2017 - 08/2018]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC P0010-13.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0011-07	Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Mechanical Failure	10° CA or greater camshaft timing gear assembly (bank 1) run-out maintained for 0.6 seconds or longer for 2 times (1 trip detection logic).	Cam timing oil control solenoid assembly (for intake camshaft of bank 1) Camshaft timing gear bolt (camshaft timing oil control valve assembly [for intake camshaft of bank 1]) Camshaft timing gear assembly (bank 1) ECM	Comes on	DTC stored	SAE Code: P0011 DTC for Mexico Models: Applies
P0021-07	Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2 Mechanical Failure	10° CA or greater camshaft timing gear assembly (bank 2) run-out maintained for 0.6 seconds or longer for 2 times (1 trip detection logic).	Cam timing oil control solenoid assembly (for intake camshaft of bank 2) Camshaft timing gear bolt (camshaft timing oil control valve assembly [for intake camshaft of bank 2]) Camshaft timing gear assembly (bank 2) ECM	Comes on	DTC stored	SAE Code: P0021 DTC for Mexico Models: Applies