Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
HINT:
| Abnormal Bank | Timing Over Advanced (Valve timing is out of specified range) |
Timing Over Retarded (Valve timing is out of specified range) |
|---|---|---|
| Bank 1 | P0011-00 | P0012-00 |
| Bank 2 | P0021-00 | P0022-00 |
- If DTC P0011-00 or P0012-00 is output, check the VVT system (for intake camshaft of bank 1) circuit.
- If DTC P0021-00 or P0022-00 is output, check the VVT system (for intake camshaft of bank 2) circuit.
- Bank 1 refers to the bank that includes the No. 1 cylinder*.
*: The No. 1 cylinder is the cylinder which is farthest from the transaxle.
- Bank 2 refers to the bank that does not include the No. 1 cylinder.
- DTC P0011-00, P0012-00, P0021-00 or P0022-00 may be stored when foreign matter in the engine oil is caught in some parts of the system. The DTC will remain stored even if the system returns to normal after a short time. That foreign matter may then be captured by the oil filter.
- Read freeze frame data using the Techstream. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.