LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Starting System (2GR-FKS) - Service Information (Except Hybrid)) >> Engine Switch >> Removal [06/2017 - ] >> Procedure

Removal [06/2017 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 1 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 1 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 1 [03/2020 - ]

  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 22 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 22 [10/2020 - ]

  3. REMOVE ENGINE SWITCH 
    1. Disengage the 2 claws and remove the engine switch from lower instrument panel finish panel assembly.
      GTY753719Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals