LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Starting System (2GR-FKS) - Service Information (Except Hybrid)) >> Engine Switch >> Installation [06/2017 - ] >> Procedure

Installation [06/2017 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL ENGINE SWITCH 
    1. Engage the 2 claws to install the engine switch to the lower instrument panel finish panel assembly.
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 21 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 24 [10/2020 - ]

  3. INSTALL NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 13 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 12 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 12 [03/2020 - ]

scientia non olet · About LEMON Manuals