LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Transfer Case - Service Information (Except Hybrid)) >> 4WD Control Ecu >> Removal [03/2020 - 10/2020] >> Procedure

Removal [03/2020 - 10/2020]: Procedure

WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to REMOVAL [06/2017 - 10/2020]

  2. REMOVE NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 36

  3. REMOVE 4WD ECU ASSEMBLY 
    GTY958424Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the 4WD ECU assembly connector.
    2. Remove the nut and 4WD ECU assembly from the instrument panel reinforcement assembly.
scientia non olet · About LEMON Manuals