Installation [03/2020 - ]: Procedure
WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL 4WD ECU ASSEMBLY
- Install the 4WD ECU assembly to the instrument panel reinforcement assembly with the nut.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- Connect the 4WD ECU assembly connector.
- Install the 4WD ECU assembly to the instrument panel reinforcement assembly with the nut.
- INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY
Refer to PROCEDURE - Step 6 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 5 [10/2020 - ]
- INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
Refer to INSTALLATION [06/2017 - ]