LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Dynamic Torque Control AWD System - Diagnostic Codes & Symptom Tests (Except Hybrid)) >> Dynamic Torque Control AWD System >> DTC C1299: Cancellation of 4WD Control [10/2020 - ] >> Description

DTC C1299: Cancellation of 4WD Control [10/2020 - ]: Description

WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is output if the heat generated by the transmission coupling assembly exceeds a certain amount or if the estimated oil temperature of the transfer exceeds a certain amount while driving.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1299 Cancellation of 4WD Control When one of the following conditions is met:
  • The heat generated by the differential coupling exceeds a certain amount.
  • The estimated oil temperature of the transfer exceeds a certain amount.
  • Condition, size or tire pressure of the front or rear tires
  • Suspension and ball joint
  • Drive shaft
  • Propeller shaft
  • Transmission coupling assembly
  • 4WD ECU assembly
DTC DETECTION CONDITIONS: C1299

  Vehicle Condition
Pattern 1 Pattern 2
Diagnosis Condition - - -
Malfunction Status The heat generated by the differential coupling exceeds a certain amount. -
The estimated oil temperature of the transfer exceeds a certain amount. -
Detection Time - -
Number of Trips 1 trip 1 trip