LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Dynamic Torque Control AWD System - Diagnostic Codes & Symptom Tests (Except Hybrid)) >> Dynamic Torque Control AWD System >> DTC C1280: Engine Circuit Malfunction [03/2020 - ] >> Procedure

DTC C1280: Engine Circuit Malfunction [03/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR DTC (ENGINE CONTROL SYSTEM) 
    1. Check if the engine control system DTC is output.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      Engine control system DTC is not output A
      Engine control system DTC is output B

    Result: 

    REPLACE 4WD ECU ASSEMBLY. Refer to  REMOVAL [03/2020 - 10/2020]  , or refer to  REMOVAL [10/2020 - ] 

    Result: 

    GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART). Refer to  DIAGNOSTIC TROUBLE CODE CHART [03/2020 - 10/2020]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2020 - 08/2021]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2021 - ]