Inspection [03/2020 - ]: Procedure
WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
- Shift Paddle Switch LH (Transmission Shift Switch Assembly):
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Shift Paddle Switch LH (Transmission Shift Switch Assembly))Standard Resistance
Tester Connection Condition Specified Condition 1 (SDN) - 2 (ECC) "-" (Down shift) shift paddle switch operated and held Below 2.5 Ω "-" (Down shift) shift paddle switch not operated 1 MΩ or higher 1 (SDN) - 3 (ECC1) "-" (Down shift) shift paddle switch operated and held Below 2.5 Ω "-" (Down shift) shift paddle switch not operated 1 MΩ or higher If the result is not as specified, replace the shift paddle switch LH (transmission shift switch assembly).
- Measure the resistance according to the value(s) in the table below.
- Shift Paddle Switch RH (Transmission Shift Switch Assembly):
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Shift Paddle Switch RH (Transmission Shift Switch Assembly))Standard Resistance
Tester Connection Condition Specified Condition 1 (SUP) - 2 (ECC) "+" (Up shift) shift paddle switch operated and held Below 2.5 Ω "+" (Up shift) shift paddle switch not operated 1 MΩ or higher If the result is not as specified, replace the shift paddle switch RH (transmission shift switch assembly).
- Measure the resistance according to the value(s) in the table below.
- Shift Paddle Switch LH (Transmission Shift Switch Assembly):