LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission System (UB80F) - Service Information (1 Of 2) (Except Hybrid)) >> Shift Lever >> Reassembly [03/2020 - ] >> Procedure

Reassembly [03/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LOWER POSITION INDICATOR HOUSING 
    1. Engage the 4 claws and 2 guides to install the lower position indicator housing to the shift lock control unit assembly.
      GTY762206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the lower position indicator housing.

  2. INSTALL SHIFT POSITION INDICATOR 
    1. Engage the 2 claws to install the shift position indicator to the rear upper console panel sub-assembly.
      GTY762205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 2 screws.
      GTY762204Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Engage the 2 clamps to connect the wire harness.
      GTY773307Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals