LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission System (UB80F) - Service Information (1 Of 2) (Except Hybrid)) >> Shift Lever >> Disassembly [03/2020 - ] >> Procedure

Disassembly [03/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT POSITION INDICATOR 
    1. Disengage the 2 clamps to disconnect the wire harness.
      GTY773307Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws.
      GTY762204Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 2 claws and remove the shift position indicator from the rear upper console panel sub-assembly.
      GTY762205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE LOWER POSITION INDICATOR HOUSING 
    1. Disengage the 4 claws and 2 guides to remove the lower position indicator housing from the shift lock control unit assembly.
      GTY762206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the lower position indicator housing.

scientia non olet · About LEMON Manuals