LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission System (UB80F) - Service Information (1 Of 2) (Except Hybrid)) >> Combination Switch >> Installation [03/2020 - ] >> Procedure

Installation [03/2020 - ]: Procedure

WARNING: This page is about a different car, the 2024 Toyota Camry, 2023 Toyota Camry, 2022 Toyota Camry, 2021 Toyota Camry, and 2020 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL COMBINATION SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) 

    Refer to PROCEDURE - Step 1

  2. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    See step  1

  4. INSTALL SHIFT LOCK RELEASE BUTTON COVER 

    See step  5

  5. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 9

  6. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH 

    Refer to PROCEDURE - Step 10

  7. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

  8. INSTALL NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 12

scientia non olet · About LEMON Manuals