LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Outlets (Interior) - Service Information (Except Hybrid) >> Wireless Charger Assembly >> Removal [03/2017 - 06/2017] >> Procedure

Removal [03/2017 - 06/2017]: Procedure

  1. REMOVE NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 1

  2. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH 

    Refer to PROCEDURE - Step 3

  4. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 4

  5. REMOVE SHIFT LOCK RELEASE BUTTON COVER 

    Refer to PROCEDURE - Step 2

  6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  7. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 7

  8. REMOVE SHIFT POSITION INDICATOR 

    Refer to PROCEDURE - Step 1

  9. REMOVE MOBILE WIRELESS CHARGER CRADLE ASSEMBLY (FRONT CONSOLE BOX INSERT SUB-ASSEMBLY) 

    Refer to PROCEDURE - Step 9

scientia non olet · About LEMON Manuals