LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge System - Diagnostics - Introduction (3 Of 3) (Except Hybrid) >> Meter / Gauge System >> DTC Check / Clear [03/2017 - ] >> DTC Check / Clear [03/2017 - ]

DTC Check / Clear [03/2017 - ]

  1. CHECK FOR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.

      Body Electrical > Combination Meter > Trouble Codes 

    5. Check for DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Combination Meter / Clear DTCs.

      Body Electrical > Combination Meter > Trouble Codes 

    5. Clear the DTCs.
scientia non olet · About LEMON Manuals