LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System - Service Information (Except Hybrid) >> Washer Motor >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

  1. REMOVE FRONT WHEEL RH 

    Refer to REMOVAL [03/2017 - 06/2017] , or refer to REMOVAL [06/2017 - ]

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH 
    1. Remove the 3 screws and front wheel opening extension pad RH.
      GTY773071Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT FENDER LINER RH 
    1. Remove the 6 screws.
      GTY761154Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the clip.
      GTY757825Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
    3. Using a screwdriver, disengage the 2 claws.

      HINT: 

      Tape the screwdriver tip before use.

    4. Remove the 11 clips and front fender liner RH.
      GTY773067Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. DRAIN WASHER FLUID 
    1. Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
      GTY761142Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Use a container to collect the washer fluid.

  5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY 
    1. Disconnect the connector.
      GTY742960Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Remove the windshield washer motor and pump assembly as shown in the illustration.