Remote Engine Starter does not Operate [08/2022 - ]: Procedure

1. Check that the engine can be started by pressing the ignition switch.

   Result

   Result	Proceed to
   Engine can be started.	A
   Engine cannot be started.	B

Result: 

B 

GO TO SMART KEY SYSTEM (for Start Function). Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2022 - ] 

Result: 

A 

See step  2

HINT: 

If registration is not performed after replacing any of the following parts, the remote engine start and stop will not be available. 

• Certification ECU (smart key ECU assembly)
• DCM (telematics transceiver)

1. Perform remote engine start and stop registration.

   Refer to REGISTRATION [08/2022 - ]

2. Check if the problem symptom recurs.

   Result

   Result	Proceed to
   System does not return to normal.	A
   System returns to normal.	B

Result: 

A 

CONTACT SERVICE CENTER 

Result: 

B 

END