DTC C1610: Camera ECU Malfunction [06/2017 - ]: Procedure

1. Choose the model to be inspected.

   Result

   Result	Proceed to
   w/ Parking Assist Monitor System	A
   w/ Panoramic View Monitor System	B

Result: 

B 

See step  4

Result: 

A 

See step  2

1. Clear the DTCs.

   Chassis > Parking Assist Camera > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Chassis > Parking Assist Camera > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO PARKING ASSIST MONITOR SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2017 - ] 

Result: 

OK 

See step  3

1. Clear the DTCs.

   Body Electrical > Navigation System > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Body Electrical > Navigation System > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END 

Result: 

NG 

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY. Refer to  REMOVAL [06/2017 - 10/2020]  , or refer to  REMOVAL [10/2020 - ] 

1. Clear the DTCs.

   Chassis > Panoramic View Monitor > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Chassis > Panoramic View Monitor > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO PANORAMIC VIEW MONITOR SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2017 - ] 

Result: 

OK 

See step  5

1. Clear the DTCs.

   Body Electrical > Navigation System > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Body Electrical > Navigation System > Trouble Codes 

   OK

   No DTCs are output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END 

Result: 

NG 

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY. Refer to  REMOVAL [06/2017 - 10/2020]  , or refer to  REMOVAL [10/2020 - ]