Installation [03/2017 - ]: Procedure

1. Engage the guide, clip and claw as shown in the illustration to install the trip switch.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

See step  2 [03/2017 - 06/2017], or see step  2 [06/2017 - ]

Refer to PROCEDURE - Step 27 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 27 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 30 [10/2020 - ]

Refer to PROCEDURE - Step 13 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 13 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 12 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 12 [03/2020 - ]