Caution / Notice / Hint

NOTE:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
Refer to PRECAUTION [06/2017 - 09/2019] , or refer to PRECAUTION [09/2019 - 03/2020] , or refer to PRECAUTION [03/2020 - ]
After replacing an ultrasonic sensor or the clearance warning ECU assembly, perform the necessary procedures (adjustment, calibration, initialization or registration).
Refer to CALIBRATION [06/2017 - 10/2020]
When DTC C1A4B is stored, there may be a malfunction in the lighting system. Inspect the lighting system before performing the following procedure.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [03/2017 - 10/2020]