Installation [10/2014 - 10/2015]: Procedure

1. Install the front seat inner belt assembly LH with the nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *a	Protruding Part

   Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

   NOTE:

   Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

2. Engage the clamp.
3. Engage each clamp under the front seat assembly LH.

1. for 4 Way Seat Type:

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *a	Protruding Part
   *b	Guide
   *c	Clamp

   1. Install the front seat inner belt assembly RH with the nut.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE:

      Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

   2. Engage the guide and connect the recline limit switch with the screw.
   3. Engage the clamp.
2. for 8 Way Seat Type:

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *a	Recline Limit Switch
   *b	Lift Limit Switch
   *c	Protruding Part
   *d	Guide
   *e	Clamp

   1. Install the front seat inner belt assembly RH with the nut.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE:

      Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

   2. Engage the guide and connect the recline limit switch with the screw.
   3. Connect the lift limit switch with the screw.
   4. Engage each clamp.
3. Engage each clamp under the front seat assembly RH.
4. Connect the connector under the front seat assembly RH.
5. Engage the guide to connect the front seat cushion cover sub-assembly RH.

HINT: 

Use the same procedure described for the LH side (Refer to PROCEDURE - Step 44 ).

HINT: 

Use the same procedure described for the LH side (Refer to PROCEDURE - Step 45 ).

(Refer to INSTALLATION [10/2014 - ] )