LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Avalon XLE >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake (Service Information) (Except Hybrid) >> Parking Brake Switch >> Inspection [10/2014 - ] >> Procedure

Inspection [10/2014 - ]: Procedure

  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY 
    1. Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.
      GTY567676Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
      TEXT IN ILLUSTRATION

      *1 Terminal
      *2 Nut
      *a On
      *b Off
      STANDARD RESISTANCE

      Tester Connection Switch Condition Specified Condition
      Terminal - Nut On (When shaft is not pressed) Below 1 Ω
      Terminal - Nut Off (When shaft is pressed) 10 kΩ or higher

      If the value is not as specified, replace the parking brake switch assembly.

scientia non olet · About LEMON Manuals