LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Avalon XLE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System / Keyless Entry System (Service Information) (Except Hybrid) >> Remote Engine Starter Ecu >> Installation [10/2014 - ] >> Procedure

Installation [10/2014 - ]: Procedure

  1. INSTALL REMOTE ENGINE STARTER ECU 
    1. Engage the claw to install the remote engine starter ECU as shown in the illustration.
      GTY362193Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
    2. w/o Glass Breakage Sensor:
      1. Install the bracket with the bolt.
    3. w/ Glass Breakage Sensor:
      1. Install the glass breakage sensor ECU with the bolt.
  2. INSTALL REMOTE ENGINE STARTER ECU WITH BRACKET (w/o Glass Breakage Sensor) 
    1. Engage the clamp.
    2. Engage the guide.
    3. Install the remote engine starter ECU with bracket with the nut.
    4. Connect the connector.
  3. INSTALL GLASS BREAKAGE SENSOR ECU WITH REMOTE ENGINE STARTER ECU (w/ Glass Breakage Sensor) 
  4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12

  5. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    (Refer to INSTALLATION [10/2014 - ] )

scientia non olet · About LEMON Manuals