LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Avalon XLE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System / Keyless Entry System (Service Information) (Except Hybrid) >> Certification Ecu >> Installation [10/2014 - 10/2015] >> Procedure

Installation [10/2014 - 10/2015]: Procedure

  1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ ECU Integration Box RH) 
    1. Engage the 2 claws to install the certification ECU (smart key ECU assembly) as shown in the illustration.
      GTY361771Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  2. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/o ECU Integration Box RH) 
    1. Install the certification ECU (smart key ECU assembly) with the nut and bolt.
    2. Connect each connector.
  3. INSTALL ECU INTEGRATION BOX RH (w/ ECU Integration Box RH) 

    Refer to PROCEDURE - Step 2

  4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12

  5. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    (Refer to INSTALLATION [10/2014 - ] )

scientia non olet · About LEMON Manuals