LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Avalon XLE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Cellular Communication System (Service Information) (Except Hybrid) >> DCM (Telematics Transceiver) >> Installation [10/2014 - ] >> Procedure

Installation [10/2014 - ]: Procedure

  1. INSTALL DCM (TELEMATICS TRANSCEIVER) ASSEMBLY 
  2. INSTALL NO. 1 DCM (TELEMATICS TRANSCEIVER) BRACKET 
    1. Install the No. 1 DCM (telematics transceiver) bracket with the 2 screws.
  3. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET 
    1. Install the DCM (telematics transceiver) with bracket with the 3 screws.
  4. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BACK-UP BATTERY 
    1. Connect each connector.
    2. Engage the 2 guides to temporarily install the DCM (telematics transceiver) with back-up battery.
    3. Install the DCM (telematics transceiver) with back-up battery with the bolt.
    4. Engage the 3 clamps and connect the connector.
  5. INSTALL AUDIO AMPLIFIER COVER 
    1. Install the audio amplifier cover with the 2 clips.
  6. INSTALL FRONT SEAT ASSEMBLY RH 

    (Refer to INSTALLATION [10/2014 - ] )

  7. DCM ACTIVATION 

    HINT: 

    When replacing the DCM (telematics transceiver), perform vehicle contract setting (Refer to DCM ACTIVATION [10/2014 - ] ).

scientia non olet · About LEMON Manuals