DTC B279C: Theft Deterrent System Presence Detection [10/2014 - ]: Procedure

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

Result: 

NEXT 

See step  2

1. Check for DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

   HINT: 

   Before checking for DTCs, perform the "DTC Output Confirmation Operation" procedure.

   OK

   DTC B279C is not output.

Result: 

OK 

USE SIMULATION METHOD TO CHECK 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )

Result: 

NG 

See step  3

1. Replace the current ECM with the proper ECM (Refer to REMOVAL [10/2014 - ] ).

Result: 

NEXT 

END