DTC P0793: Intermediate Shaft Speed Sensor "A"; DTC P07C5: Intermediate Shaft Speed Sensor "A" Circuit Low; DTC P07C6: Intermediate Shaft Speed Sensor "A" Circuit High [10/2015 - 06/2017]: Description
This sensor detects the rotation speed of the counter gear which shows the output speed of transaxle. By comparing the input turbine speed signal (NT) with the counter gear speed sensor signal (NC), the TCM detects the shift timing of the gears and appropriately controls the engine torque and hydraulic pressure according to various conditions, thus, providing smooth gear shifts.
TEXT IN ILLUSTRATION
| *1 | Counter Gear | *2 | Clutch Drum |
| *3 | Output Speed Sensor NC | *4 | Input Speed Sensor NT |
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0793 | When the vehicle speed is 25 km/h (15.5 mph) or higher, the counter gear speed is less than 300 rpm for 2 seconds or more. (1-trip detection logic) |
|
| P07C5 | When the speed sensor input voltage is less than 0.1 V for 2 seconds or more. (1-trip detection logic) | |
| P07C6 | When the speed sensor input voltage is more than 1.9 V for 2 seconds or more. (1-trip detection logic) |