LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Avalon XLE Plus >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (2GR-FE) (Service Information) (Except Hybrid) >> Heated Oxygen Sensor >> Removal [10/2014 - ] >> Procedure

Removal [10/2014 - ]: Procedure

  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY 

    (Refer to REMOVAL [10/2014 - ] )

  2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) 
    1. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
      GTY603484Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
      • SST: 09224-00010 
  3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) 
    1. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
      GTY579300Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
      • SST: 09224-00010 
scientia non olet · About LEMON Manuals