DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0151: Lost Communication with Restraints Control Module; DTC U0155: Lost Communication with Instrument Panel Cluster (IPC) Control Module [10/2014 - 10/2015]: Procedure

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
2. Check for DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

   OK

   DTCs are not output.

Result: 

OK 

USE SIMULATION METHOD TO CHECK 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015] )

Result: 

NG 

Refer to CAN COMMUNICATION SYSTEM 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015] )