LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Installation [06/2016 - 03/2017] >> Procedure

Installation [06/2016 - 03/2017]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
    2. Engage the 2 clips to install the combination meter assembly.
    3. Install the 2 screws.
  2. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT 

    Refer to PROCEDURE - Step 5

  3. INSTALL METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  4. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel) 

    Refer to PROCEDURE - Step 14

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel) 

    Refer to PROCEDURE - Step 15

  6. REGISTER ECU CODE 
    1. Register the ECU code (Refer to REGISTRATION [06/2016 - ] ).
scientia non olet · About LEMON Manuals