LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Installation [03/2017 - ] >> Procedure

Installation [03/2017 - ]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
    2. Engage the 2 clips to install the combination meter assembly.
    3. Install the 2 screws.
  2. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT 

    Refer to PROCEDURE - Step 5

  3. INSTALL METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  4. INSTALL INSTRUMENT PANEL ORNAMENT 

    Refer to PROCEDURE - Step 15

  5. REGISTER ECU CODE 
    1. Register the ECU code (Refer to REGISTRATION [06/2016 - ] ).
scientia non olet · About LEMON Manuals