LEMON Manuals: Even more car manuals for everyone

Home >> Toyota >> 2018 >> 4Runner TRD Pro >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Vehicle Stability Control System (For Vacuum Brake Booster) - Diagnostic Codes (B1380-U0074) & Symptom Tests >> VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster) >> Slip Indicator Light does not Come ON [08/2019 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

After replacing the skid control ECU (brake actuator assembly), perform "Calibration".

Refer to CALIBRATION [08/2019 - ]

scientia non olet · About LEMON Manuals