LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2017 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Service Information) (Except Hybrid) >> Rear Trailing Arm >> Removal [12/2012 - ] >> Procedure

Removal [12/2012 - ]: Procedure

  1. REMOVE REAR WHEEL 
  2. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY 
    1. Remove the bolt and disconnect the No. 3 parking brake cable from the rear trailing arm.
      GTY382276Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH 

    See step  2

  4. REMOVE REAR TRAILING ARM ASSEMBLY LH 
    1. Loosen the nut of the rear trailing arm.
      GTY367991Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts from the rear axle carrier.
      GTY367990Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 3 bolts and trailing arm from the vehicle.
      GTY367989Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bolt, nut and rear suspension arm bracket from the rear trailing arm.
      GTY382274Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals