Installation [12/2012 - ]: Procedure

1. Apply a light coat of engine oil to a new O-ring and install the O-ring to the camshaft timing oil control valve assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	New O-Ring

2. Install the camshaft timing oil control valve assembly with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (the surface that contacts the cylinder head cover).
   • Be careful that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.
3. Connect the camshaft timing oil control valve assembly connector.

1. Apply a light coat of engine oil to a new O-ring and install the O-ring to the camshaft timing oil control valve assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	New O-Ring

2. Install the camshaft timing oil control valve assembly with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (the surface that contacts the cylinder head cover).
   • Be careful that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.
3. Connect the camshaft timing oil control valve assembly connector.

Refer to PROCEDURE - Step 5

See step  5