Installation [12/2012 - ]: Procedure

1. Apply adhesive to 2 or 3 threads of the PCV valve.

   Adhesive

   Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

2. Using a 19 mm deep socket wrench, install the PCV valve.

   Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf) 

3. Connect the No. 2 PCV hose to the PCV valve, and slide the clamp to secure it.

Refer to INSTALLATION [12/2012 - 10/2015] , or refer to INSTALLATION [10/2015 - ]